|
Nominal diameter [mm]
|
12
|
13
|
14
|
15
|
16
|
18
|
20
|
22
|
24
|
25
|
26
|
27
|
28
|
30
|
32
|
33
|
34
|
|
Mass of 1m [kg]
|
0,88
|
1,04
|
1,21
|
1,39
|
1,58
|
2,00
|
2,47
|
2,98
|
3,55
|
3,85
|
4,17
|
4,49
|
4,83
|
5,55
|
6,31
|
6,71
|
7,13
|
|
Nominal diameter
d [mm]
|
35
|
36
|
37
|
38
|
40
|
42
|
43
|
45
|
46
|
47
|
48
|
50
|
52
|
|
Mass of
1m [kg]
|
7,55
|
7,99
|
8,44
|
8,90
|
9,87
|
10,9
|
11,4
|
12,5
|
13,0
|
13,6
|
14,2
|
15,4
|
16,7
|
MANUFACTURING SPECIFICATIONS:
|
Lengths:
|
6m with possible lengths up to 18m
|
|
Packing:
|
bars are delivered in bundles app. 1.5 Mt – 4.5 Mt
|
Bars are manufactured in accordance with standards: |
PN-EN 10060
PN-84/H-93000
PN-85/H-93001
PN-EN 10021
PN-EN 10221 (po uzgodnieniu kl.B)
DIN 1013 cz.1
|
Certification: |
PN-84/H-93000 (normal quality)
PN-85/H-93001 (higher quality)
|
Dimensions and tolerances acc. to the following standards: |
PN-EN 10060
PN-75/H-93200-00
PN-87/H-93200-02
DIN 1013 cz.1
|
|
Status of product:
|
as rolled
|
Bars can be manufactured in accordance with other foreign standards.
GRADES OF STEEL:
| 1.Non-aloy structural steels: |
| PN-EN 10025-2 |
S235JR, S275JR, S355JR, E295, E335, E360 |
| 1.1 Non-aloy structural steels: |
| PN-88/H-84020 |
St3SY, St3S, St3SCuY, St4S, St4V, St3W, MSt5, St5, St6, MSt7, St7 And others acc. to the standard |
| 2. Steel for concrete reinforcement |
| PN-89/H-84023/06 |
StSX-b, St3S-b, St3SY-b, StOS-b |
| 3. Quenched and tempered unalloyed steels: |
PN-EN 10083-1
PN-EN 10083-2 |
C22E, C25E, C35E, C45E, C55E, C60E
C22, C25, C30, C35, C40, C45, C50, C55, C60 |
| 3.1 Quenched and tempered unalloyed steels: |
| PN-93/H-84019 |
25, 30, 35, 40, 45, 45G, 50, 50G, 55, 60G |
| 4. Steel for mining coil chains production: |
| PN-92/H-93028 |
23GHNMA, 23G2NMHA |
| 4.1 Steel for coil chains: |
PN-89/H-84023/08
DIN 17115 |
15GJ, 18G2AA, 23GHNMA, 25GHNMA
23MnNiMoCr5-4, 27MnSi5 |
| 5. Alloy constructional steel for toughening: |
| PN-EN 10083-1 |
25CrMo4, 34Cr4, 34CrMo4, 37Cr4, 38Cr2, 41Cr4, 42CrMo4, 46Cr2, 51CrV4 |
| 5.1 Alloy steel for toughening and surface hardening: |
| PN-89/H-84030/04 |
30H, 40H, 30HMA, 40HM |
| 6. Case hardening steels: |
| PN-EN 10084 |
C10E, C15E, 16MnCr5, 20MnCr4, 20MnCr5, 20MoCr3, 20MoCr4, 20NiCrMo2-2 |
| 6.1 Case hardening steels: |
|
DIN 17210
PN-89/H-84030/02
PN-93/H-84019
|
C10, C15 - carbon steel
17Cx3, 20Cr4, 16MnCr5, 20MnCr5, 20MoCr4 - alloy steel
16HG, 20HG, 20HNM, 22HNM
10, 15, 20, 15G, 20G
|
| 7. Steel for operation at elevated temperature service: |
PN-EN 10028-2
PN-75/H-84024 |
13CrMo4-5, 16Mo3
15HM, 16M |
Specific chemical composition and properties to be agreed with customer, if required. Manufacturing of non-standard quality depends on ordering min. 100 Mt.
|
